Complementary products
Video presentation

DF Pro Solo

Digital Finisher Pro Solo is the perfect finishing solution for your Digital Press.
This option allows you to finish all your printed jobs in one pass, saving you both time and money by having professionally printed and finished products ready for delivery.

The DF Pro can reach up to 5,800 finished sheets per hour, and for any given document, up to 20 distinct operations can be applied, all in one pass such as :
• horizontal and vertical cutting,
• positive and negative creasing
• horizontal and vertical perforating

The DF Pro Solo is a compact module that can sit next to your Digital Press.
 
Paper Finishing
ProductivityUp to 5,800* A4 sheets per hour (with 3 finishing functions)
or up to 3,800* A3 sheets per hour (with 3 finishing functions)


* Finishing speed will vary according to finishing tools and paper size used
Paper Formats & WeightsPaper format from 105x148 mm up to 375x1200 mm (from 4.1’’x5.8’’ up to 15’’x47’’)
Paper thickness from 90 to 400 Gsm
Paper inputA high capacity pneumatic feeder is provided with an air feed system. The paper capacity is up to 5,500 sheets (90 Gsm/ 22 lb bond) or 60 cm/23’’ paper height
Registration TableThe DF Pro Solo has its own offset feeder table with variable air vaccum to enhance an accurate finishing (+/- 0.2 mm)
OutputThe DF Pro Solo has a high capacity stack, a top loading stacker with laser guided stack adjustment.
It has a capacity of up to 5,500 sheets (90 Gsm/ 22 lb bond) or 60 cm/23’’ paper height
Standard Finishing ToolsDF Pro Solo has two types of standard finishing tools:

• On-board tools
2 rotary blades for horizontal cutting/trimming
1 blade for vertical cutting

• Interchangeable tools
1 interchangeable tool for negative creasing (vertical)
Up to two tools can be simultaneously loaded and are automatically detected by the equipment.
The unused tool are stored in a parking area with free slots
CuttingCutting and Trimming*
• Trimming
2 standard rotary blades working horizontally and in the range of 4 to 30mm from each sheet edge

• Cutting
1 standard interchangeable tool for multiple vertical cuttings (min. 4 mm between each cut)
SlittingNEW - Horizontal and Central Slitting

• 1 optional horizontal slitting tool for 2 up documents with adjustable central gutter from 5 to 15 mm (0.20 to 0.59’’).
CreasingVertical direction
Multiple creasing available with a mininum gap of 2mm. Each tool includes two different creasing widths for a better fit with the various paper thicknesses. 3 steps of creasing strengh

• 1 standard tool for a negative creasing (folding on the front side of the sheet)
• 1 optional tool for a positive creasing (folding on the back side of the sheet)

* Paper thickness from 100 to 400 Gsm depending on substrates
PerforatingPerforating density is 11 TPI(4), 17 and 26 TPI available as an option 3 steps of perforating strengh

• Horizontal direction
1 standard rotary blade up to 4 with option with a mininum gap of 30 mm/1.1’’ between each blade.
Continue or discontinue perforation fully under user’s control.
Programmable by step of 1 mm / 0.04”

• Vertical direction
1 standard tool for multiple perforations across the entire width of the sheet. For discontinuous perforation, optional tool for a given perforation length.

* Paper thickness from 80 to 300 Gsm depending on substrats
Digital PilotUser friendly touch-screen interface (14.5 cm/ 5.7” display)
Pre-defined formats
Up to 500 user templates
Electrical Requirements100-240V, 50-60Hz (1 phase 16A)
Dimensions & WeightLength x width x height: 320 x 181 x 120 cm (without the extensions for XL sheet sizes)
± 258 kg / 568 lbs
Operating EnvironmentTemperature: 10°C to 30°C - optimal 18°C to 25°C
Temperature: 50°F to 86°F - optimal 64°F to 77°F
Language Title Download Link
English MGI DF Pro Solo (May 6th, 2016)  
French MGI DF Pro Solo (May 6th, 2016)  
English DF Pro - Configuration Guide  
Product Advantages

Easy to setup

The DF Pro Solo can be installed in just a few minutes. The equipment can be rolled to any place of your plant.

Interchangeable Tools

2 interchangeables tools can be loaded in the DF Pro Solo simultaneously.
Change your tool in seconds without any additional equipment.
Other specific tools as an option.

Touch Screen

Easy and intuitive browsing thanks to a dedicated touch screen. Access to a large predefined format library and the storage and recall of your regular applications.

Product Applications
 

Brochure & tri-fold

Whether it's a simple duplex page or tri-fold (up to 1200 mm/47" long) document, MGI's Digital Presses can produce a wide range of creative and attractive brochures.

 

Folders

Whether you're printing a short run of folders on a 1200 mm / 47 inch sheet or spot UV coating a finished product, MGI has a digital solution for you.

 

Tickets

The Meteor series of Digital Presses combined with the Digital Finisher are the ideal printing and finishing solutions for many applications, such as tickets.

The power of the digital press allows you to add any VDP such as numbering, barcode, etc.

 

Letterhead

MGI's special silicone free toner and fusing technology will allow you to print laser safe documents, such as letterhead, that will not re-melt during overprinting. Being able to print letterhead digitally instead of running it on an offset press will bring major advantages in terms of costs, plus shorter run options and quick turnarounds.

 

Menus

Print on paper or onto synthetics such as Yupo or polyester for additional durability.

 

Personalized Direct Mail

Utilize full variable data capabilities on a range of personalized, targeted applications, such as direct mail. Variable information such as text, barcodes, graphics can be customized to each individual member of your audience, resulting in higher response rates and better ROI.

 

Photobooks

MGI's digital printing and finishing solutions offer a wide range of options for custom photo products, such as photobooks. Take an active part in the 25 million of photobooks that will be produced in 2013.